How to open the door without verification for FC-8600T face access controller? Want to realize the automatic opening of the door after sensing the person entering and exiting, and then take a picture of the person entering and leaving.
Hello, welcome to use our products, thank you for your support. FC-8600T supports the authentication-free door opening function, this function needs to be used with the FCARD3500 software, first, please install the FC-8600T face recognition access controller device in the FCARD3500 software.
Software installation FC-8600T face recognition access controller operation is as follows:
1. Automatic device search: Click the ‘Auto Search Device’ under the ‘Install Device’ menu in the software menu, select ‘TCP/IP LAN Communication Mode’, and click to start the search (pictured). After searching, you can double-click the device list to modify the IP.
2. Install the device: After modifying the IP, you can check the device that needs to be installed, click ‘install device’, enter the installation interface, modify the corresponding information and parameters, and click ‘install’ to complete the installation of the device.
After the installation is complete, select the menu ‘access control information-door opening function settings-full card door opening settings’, select ‘enable’ this function, and set the time period and unregistered card handling method, select the face recognition access controller device that needs to enable this function, and click "Save and upload" to open the door without verification, if the face recognition access controller has enabled the real-time capture function (this function is enabled by default), you can view the photos of people passing by.
Sweep the concern Yingze electronic official WeChat
