How does the FC-8300T face recognition access controller authorize the face to open the door on the FCARD3500 one card pass software?
Hello, welcome to use our products, thank you for your support. First of all, please make sure that the FC-8100T face recognition access controller and the computer where the software is located are in the same local area network.
Software installation FC-8300T face recognition access controller operation is as follows:
1.Automatic device search: Click the ‘Auto Search Device’ under the ‘Install Device’ menu in the software menu, select ‘TCP/IP LAN Communication Mode’, and click to start the search (pictured). After searching, you can double-click the device list to modify the IP.
2. Install the device: After modifying the IP, you can check the device that needs to be installed, click ‘install device’, enter the installation interface, modify the corresponding information and parameters, and click ‘install’ to complete the installation of the device.
Software authorization operations are as follows:
1. New personnel: fill in the corresponding personnel information, such as name, card number, profile picture, personal password and other information; (with photos)
2. Access level setting: select the person who needs to be authorized and the door device (face recognition access controller, access control board, fingerprint access controller, etc.) that the person needs to authorize, and select the door opening time, number of door openings, expiration date and other information according to your needs, and click ' Allow the selected personnel to pass through the selected door and upload', the authorization is completed. (With photos)
Sweep the concern Yingze electronic official WeChat
