FC-8100T can set the door to be normally open during working hours and normally closed during off-duty hours? How to operate?
Hello, welcome to use our products, thank you for your support. The time of day normally open needs to be set through the FCARD3500 software, so first make sure that the FC-8100T face recognition access controller device has been installed in the FCARD3500 software and the face recognition access controller is online, the setting method is as follows:
1. Click the ‘door opening function setting’ under the ‘access control information’ menu in the software, and click the ‘timing normally open setting’ submenu under this menu. (If this function is not available, please enable this function in ‘Help’-‘Enable Function’ in the upper right corner of the software)
2. Select the door device that needs to be set to normally open, and select ‘Enable’ to regularly open.
3. Select the normally open trigger mode: the registered card is normally open during the time period, the normally open card is normally open during the time period, or the time switch lock is set according to the time period. (For your question, choose ‘set time switch lock according to time period’)
4. Set the time period that needs to be normally open every day.
5. After setting is complete, click ‘save and upload’.
Sweep the concern Yingze electronic official WeChat
