When installing FC-8100T, please guide us on the requirements of the wire and the limitation of the wire length, thank you.
Hello, welcome to use our products, thank you for your support. The following are the wire requirements and length restrictions for FC-8100T installation:
AC220V AC power cord: 3*1.0MM (or above) wire is recommended to prevent leakage, the ground wire of the power cord is recommended to be grounded.
Electric lock wire: 2*1.0MM (or above) wire must be used, and the maximum length of the line should not exceed 50 meters.
TCP/IP communication line: Please use a standard network cable, and the maximum length of the line should not exceed 100 meters.
Door sensor or exit switch cable: 2*0.5MM (or above) wire is recommended, and the maximum line length should not exceed 100 meters.
WG signal wire: It is recommended to use 4*0.5MM (or above) wire, and the maximum length of the wire should not exceed 80 meters.
Sweep the concern Yingze electronic official WeChat
